Click on photo's for larger views!

	Remove the AutoPot Easy2Grow from its shipping box.
	You should have everything shown here.
	Put one of the matrix disc (brown) into each side of the tray. It keeps roots from clogging the AquaValve.
	Hook up the 1/4" tubing to the valve (warm the tube with hot water to make it easier), then push the valve onto the tab in the bottom of the tray.
	Put a black root control mat into each pot. Snap the valve cover into place.
	Hook up the tray to your reservoir, or existing setup. (shown is a 14 gallon Rubbermaid storage container).
	Fill the pots with planting medium. We recommend a 60/40 coir/perlite mix.  Plant your plants. Add water and nutrients to the reservoir. That's it. Monitor the reservoir to make sure it does not go empty.

Additional Notes:

Check and adjust the pH level. For most vegetables and house plants, it should be between 5.5 and 6.5.

Follow the mixing instructions exactly on the nutrient label.  Always use their recommended amounts.

If planting from seeds. You will need to keep the top inch or so damp until the seeds are grown enough to seek damper conditions below.  This is best done with a spray bottle and just plain water. Spray the area where the seed is once or twice a day.